Electrical wires and power outlets gradually degrade with time and use, leading to potential threats to your property. Wiring inspection plays a significant role in ensuring that your house remains safe from electrical hazards. It is not surprising that a minor electrical fault might cause an electrical fire and endanger your loved ones’ lives.
However, many homeowners often neglect the wiring condition. At most, a request for an electrical safety examination happens in case of a tripping circuit or a bulb explosion.
Most people believe that electrical examinations are costly and time-consuming. On the contrary, electrical inspections are quick and considerably less –expensive if you spot the problems early.
Hence, homeowners should schedule electrical safety inspections regularly. The electricians must examine independently owned and operated houses every ten years and a rental property every five years. The intervals may be significantly smaller for properties older than 40 years.
But, what do Electricians in Cranbourne do during an electrical inspection? They generally perform the following 6 common electrical safety checks:
- Determine deteriorated electrical wiring and circuit parts over time.
- Check for any overloaded electrical circuits.
- Identify a grounding shortage.
- Detect any faulty wiring or other errors made by unlicensed electricians or homeowners.
- Look for fuses or breakers that might present a fire risk.
- Examine any potential dangers from electric shock.
In this article, we’ll discuss the steps an electrician in Narre Warren includes in an electrical inspection in more detail:
When Should You Have an Electrical Safety Inspection in Your Home?
You should hire an electrician in Narre Warren to perform the electrical inspection in the given conditions:
- Ensure your new house is electrically safe before you move in.
- If your property is more than 25 years old and hasn’t had an electrical examination.
- If you’ve recently completed a massive house renovation.
- If you notice an electrical device functioning abnormally, mainly if it is old.
5 Things Electricians Do to Examine Your Home’s Wiring
-
Examine the Electric Metre for Potential Flaws
It’s not just a case of ensuring the electric monitors indicate the correct amount of wattage. Electricians in Cranbourne also examine if the metre fits and if any components have worn out. The electrician searches for rust or other signs of water damage, in particular as water might leak from the metre to the main power panel.
-
Test the Circuit Breaker’s Capacity
Maintaining electrical safety necessitates checking whether the circuit breaker is working and whether the circuit is at risk of overload. Electricians in Cranbourne must first assess if the breaker can retain current flow at a reasonable level. They would check for water leakage, corrosion, or other structural and mechanical issues that might lead to sparks or fires.
-
Check Any Peeling or Damage on Electrical Wires
Electricians in Narre Warren always look for peeling and deteriorated wires bulging from their surface coatings, hanging from walls and ceilings, and being subjected to moist or humid regions. They check everything from insulated wire to those twisted around cracks and crevices. Electricians note any areas where wiring has become or may become unsafe and then suggest the necessary repairs.
-
Ensure GFCI Outlets Are Properly Installed
Ground fault circuit interrupters or GFCIs are devices placed on outlets to switch the electricity off if the GFCI detects disturbances. These disturbances include water or humidity in the outlet and items besides plugs. As a result, GFCIs are crucial for house security and electricians in Cranbourne to double-check that they are operational.
-
Measure Switchboard Height
Electricians in Cranbourne evaluate the heights of outlets and switches to ensure they are uniform. Municipal standards often mandate outlets (also known as receptacles) to be at least 15 inches above the floor and switches at least 48 inches above the floor. However, there are some measurement exceptions, and height might be substantially lower in a child’s room or for accessibility.
-
Examine All Electrical Boxes
Electricians in Narre Warren examine all electrical cabinets to ensure they are aligned with the wall and are wide enough to support the number of wire conductors and appliances you will enclose within them. You must seal the box firmly to ensure both the devices and the circuit are safe. Homeowners performing their work should choose large, wide electrical boxes to meet the inspection standards and make the wire connections smoother.
-
Lights and Switch Examination
After that, the electrician examines the lighting and switches. He’ll check every light (both indoor and outdoor) to ensure it’s in good working order. The electrician will advise you to switch to LED lighting that is more energy-efficient and long-lasting if you still use fluorescent lights. In the same way, if the majority of your home’s power outlets are two-pronged, the inspector will advise you to upgrade to three-pronged outlets, which are safer and better suited to modern household appliances.
As mentioned above, every step of the electrician’s checklist during an electrical inspection has its significance. Inspections are necessary to ensure every component of your power circuit must perform effectively and safely to avoid damage, electroshocks, or combustion.
If you’re buying a house, it’s a good idea to perform an electrical inspection or any necessary repairs before you move. However, it’s crucial to hire an ideal electrician.
We, Direct Point Electrical, are a locally owned and managed family business that has been in operation since 2012. The quality of our work, honesty and the service we offer to our clients are the basis of our developing business.
